Shortinfo RID, BAM no. 10331 (DGG-Info)

BAM name (German)	Ameisensäure, Konz. > 85 %
BAM name (English)	Formic acid, conc. > 85 %
BAM name (French)	Acide formique, conc. > 85 %
Aggregate state (under normal conditions)	liquid
BAM no.	10331
CAS no.	64-18-6
Detailinfo

Transport status	allowed
Detailinfo

Labels

Marks

Orange plate for tanks

Hazard identification number	83	corrosive or slightly corrosive substance, flammable (flash-point between 23 °C and 60 °C, inclusive)
UN number	1779	FORMIC ACID with more than 85% acid by mass

Packages	none
Loading, unloading and handling	none
Express parcel
Detailinfo

Instructions	P001
Special provisions	none
Mixed packing	Mixed packing: MP15 May - in quantities not exceeding 3 litres per inner packaging - be packed together in a combination packaging conforming to 6.1.4.21: - with goods of the same class covered by other classification codes or with goods of other classes, when mixed packing is also permitted for these; or - with goods which are not subject to the requirements of RID, provided they do not react dangerously with one another.

Instructions	IBC02
Special provisions	none

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T7 The portable tank instructions T1 to T22 apply to liquid and solid substances of Class 1 and Classes 3 to 9. The general provisions of Section 4.2.1 and the requirements of Section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the requirements of Chapter 6.9 apply. T7 Minimum test pressure (bar): 4 Minimum shell thickness (in mm-reference steel) (see 6.7.2.4): See 6.7.2.4.2 Pressure-relief requirements (see 6.7.2.8): Normal ) Bottom opening requirements (see 6.7.2.6): See 6.7.2.6.3 ) When the word "Normal" is indicated, all the requirements of 6.7.2.8 apply except for 6.7.2.8.3.
Special provisions	Special provision TP2 The degree of filling prescribed in 4.2.1.9.3 shall not be exceeded: Degree of filling = 95 / (1 + alpha x (tr - tf)) where alpha = mean coefficient of cubical expansion of the liquid between tf and tr; tr = maximum mean bulk temperature during carriage [°C]; tf = mean temperature of the liquid during filling [°C].

Portable tanks (UN tanks)

Tank instruction

Special provisions

RID tanks
Tank code	Tank code L4BN Code L4BN: L = Type of tank: Tank for substances in the liquid state (liquids or solids handed over for carriage in the molten state). ------------------------- 4 = Calculation pressure: Minimum calculation pressure: 4 bar (see 6.8.2.1.14) ------------------------- B = Openings (see 6.8.2.2.2): Tank with bottom-filling or bottom-discharge openings with 3 closures. ------------------------- N = Safety valves/devices: Tank without a breather device according to 6.8.2.2.6 and not hermetically closed.
Special provisions	Special provision TU42 Tanks with a shell constructed of aluminium alloy, including those with a protective lining, shall only be used if the pH value of the substance is not less than 5.0 and not more than 8.0.

RID tanks

Tank code

Special provisions

Transport in bulk is not permitted.

Transport in bulk containers (BK containers) is not permitted.

Substance information(collapsed)