Shortinfo RID, BAM no. 696 (DGG-Info)

BAM name (German)	Pentan-2,4-dion
BAM name (English)	Pentane-2,4-dione
BAM name (French)	Pentanedione-2,4
Aggregate state (under normal conditions)	liquid
BAM no.	696
CAS no.	123-54-6
Detailinfo

Transport status	allowed
Detailinfo

Labels

Marks

Orange plate for tanks

Hazard identification number	36	flammable liquid (flash-point between 23 °C and 60 °C, inclusive), slightly toxic, or self-heating liquid, toxic
UN number	2310	PENTANE-2,4-DIONE

Packages
Loading, unloading and handling	, Loading, unloading and handling: CW13 If any substances have leaked and been spilled in a wagon or container, it may not be re-used until after it has been thoroughly cleaned and, if necessary, disinfected or decontaminated. Any other goods and articles carried in the same wagon or container shall be examined for possible contamination.
Express parcel
Detailinfo

Instructions	P001, R001
Special provisions	none
Mixed packing	Mixed packing: MP19 May - in quantities not exceeding 5 litres per inner packaging - be packed together in a combination packaging conforming to 6.1.4.21: - with goods of the same class covered by other classification codes or with goods of other classes, when mixed packing is also permitted for these; or - with goods which are not subject to the requirements of RID, provided they do not react dangerously with one another.

Instructions	IBC03
Special provisions	none

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T4 The portable tank instructions T1 to T22 apply to liquid and solid substances of Class 1 and Classes 3 to 9. The general provisions of Section 4.2.1 and the requirements of Section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the requirements of Chapter 6.9 apply. T4 Minimum test pressure (bar): 2.65 Minimum shell thickness (in mm-reference steel) (see 6.7.2.4): See 6.7.2.4.2 Pressure-relief requirements (see 6.7.2.8): Normal ) Bottom opening requirements (see 6.7.2.6): See 6.7.2.6.3 ) When the word "Normal" is indicated, all the requirements of 6.7.2.8 apply except for 6.7.2.8.3.
Special provisions	Special provision TP1 The degree of filling prescribed in 4.2.1.9.2 shall not be exceeded: Degree of filling = 97 / (1 + alpha x (tr - tf)) where alpha = mean coefficient of cubical expansion of the liquid between tf and tr; tr = maximum mean bulk temperature during carriage [°C]; tf = mean temperature of the liquid during filling [°C].

Portable tanks (UN tanks)

Tank instruction

Special provisions

RID tanks
Tank code	Tank code L4BH Code L4BH: L = Type of tank: Tank for substances in the liquid state (liquids or solids handed over for carriage in the molten state). ------------------------- 4 = Calculation pressure: Minimum calculation pressure: 4 bar (see 6.8.2.1.14) ------------------------- B = Openings (see 6.8.2.2.2): Tank with bottom-filling or bottom-discharge openings with 3 closures. ------------------------- H = Safety valves/devices: Hermetically closed tank (see 1.2.1).
Special provisions

RID tanks

Tank code

Special provisions

Transport in bulk is not permitted.

Transport in bulk containers (BK containers) is not permitted.

Substance information(collapsed)