Shortinfo RID, BAM no. 160 (DGG-Info)

BAM name (German)	Bromaceton
BAM name (English)	Bromoacetone
BAM name (French)	Bromacétone
Aggregate state (under normal conditions)	liquid
BAM no.	160
CAS no.	598-31-2
Detailinfo

Transport status	allowed
Detailinfo

Labels

Marks

Orange plate for tanks

Hazard identification number	63	toxic substance, flammable (flash-point between 23 °C and 60 °C, inclusive)
UN number	1569	BROMOACETONE

Limited quantities	No exemption according to the provisions of Chapter 3.4 possible
Excepted quantities	E0, No exemption according to the provisions of Chapter 3.5 possible
Transport category	2
Detailinfo

Packages	none
Loading, unloading and handling	, Loading, unloading and handling: CW13 If any substances have leaked and been spilled in a wagon or container, it may not be re-used until after it has been thoroughly cleaned and, if necessary, disinfected or decontaminated. Any other goods and articles carried in the same wagon or container shall be examined for possible contamination. , Loading, unloading and handling: CW31 Wagons or large containers in which substances of this Class have been carried as full loads, or small containers in which these substances have been carried, shall be checked, after unloading, for any residues of the load.
Express parcel
Detailinfo

Instructions	P602
Special provisions	none
Mixed packing	Mixed packing: MP15 May - in quantities not exceeding 3 litres per inner packaging - be packed together in a combination packaging conforming to 6.1.4.21: - with goods of the same class covered by other classification codes or with goods of other classes, when mixed packing is also permitted for these; or - with goods which are not subject to the requirements of RID, provided they do not react dangerously with one another.

Transport in intermediate bulk containers (IBCs) is not permitted.

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T20 The portable tank instructions T1 to T22 apply to liquid and solid substances of Class 1 and Classes 3 to 9. The general provisions of Section 4.2.1 and the requirements of Section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the requirements of Chapter 6.9 apply. T20 Minimum test pressure (bar): 10 Minimum shell thickness (in mm-reference steel) (see 6.7.2.4): 8 mm Pressure-relief requirements (see 6.7.2.8): See 6.7.2.8.3 Bottom opening requirements (see 6.7.2.6): Not allowed ) ) When "Not allowed" is indicated, bottom openings are not permitted when the substance to be carried is a liquid (see 6.7.2.6.1). When the substance to be carried is a solid at all temperatures encountered under normal conditions of carriage, bottom openings conforming to the requirements of 6.7.2.6.2 are authorized.
Special provisions	Special provision TP2 The degree of filling prescribed in 4.2.1.9.3 shall not be exceeded: Degree of filling = 95 / (1 + alpha x (tr - tf)) where alpha = mean coefficient of cubical expansion of the liquid between tf and tr; tr = maximum mean bulk temperature during carriage [°C]; tf = mean temperature of the liquid during filling [°C].

Portable tanks (UN tanks)

Tank instruction

Special provisions

RID tanks
Tank code	Tank code L4BH Code L4BH: L = Type of tank: Tank for substances in the liquid state (liquids or solids handed over for carriage in the molten state). ------------------------- 4 = Calculation pressure: Minimum calculation pressure: 4 bar (see 6.8.2.1.14) ------------------------- B = Openings (see 6.8.2.2.2): Tank with bottom-filling or bottom-discharge openings with 3 closures. ------------------------- H = Safety valves/devices: Hermetically closed tank (see 1.2.1).
Special provisions

RID tanks

Tank code

Special provisions

Transport in bulk is not permitted.

Transport in bulk containers (BK containers) is not permitted.

Substance information(collapsed)