Shortinfo IMDG, BAM no. 1086 (DGG-Info)

BAM name (German)	Isopentene, Isomerengemisch
BAM name (English)	Isopentenes, isomeric mixture
BAM name (French)	Isopentènes, mélange d'isomères
Aggregate state (under normal conditions)	liquid
BAM no.	1086
CAS no.
Detailinfo

Transport status	allowed
Detailinfo

UN no.	2371
Class
Subsidiary risks
Packing group
Special provisions	none
Marine pollutant
Environmentally hazardous	Environmentally hazardous - perhaps The pure substance or several isomers are environmentally hazardous. Depending on the concentration shall mixtures or preparations meeting the criteria of chapter 2.2.9.1.10.4 (ADR/RID) or chapter 2.9.3.4 (IMDG) be marked with the environmentally hazardous substance mark.
EmS	,
Detailinfo

Labels

Marks

Orange plate for tanks

Limited quantities	No exemption according to the provisions of Chapter 3.4 possible
Excepted quantities	E3
Detailinfo

Stowage category	Stowage category E Cargo ships or passenger ships carrying a number of passengers limited to not more than 25 or to 1 passenger per 3 m of overall length, whichever is the greater number -> ON DECK OR UNDER DECK Other passenger ships in which the limiting number of passengers transported is exceeded -> PROHIBITED
Stowage provisions	none
Segregation groups	none
Segregation provisions	none
Handling	none
Detailinfo

Instructions	P001
Special provisions	none

Transport in intermediate bulk containers (IBCs) is not permitted.

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T11 The portable tank instructions T1 to T22 apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. T11 Minimum test pressure (bar): 6 Minimum shell thickness (in mm - reference steel) (see 6.7.2.4): see 6.7.2.4.2 Pressure-relief provisions ) (see 6.7.2.8): Normal Bottom opening provisions (see 6.7.2.6): see 6.7.2.6.3 ) When the word "Normal" is indicated, all the requirements of 6.7.2.8 apply except for 6.7.2.8.3.
Special provisions	Special provision TP2 The degree of filling prescribed in 4.2.1.9.3 shall not be exceeded: Degree of filling = 95 / (1 + alpha x (tr - tf)) where alpha = mean coefficient of cubical expansion of the liquid between tf and tr; tr = maximum mean bulk temperature during carriage [°C]; tf = mean temperature of the liquid during filling [°C].

Portable tanks (UN tanks)

Tank instruction

Special provisions

Transport in bulk containers (BK containers) is not permitted.

Admissibility	forbidden

Substance information(collapsed)