Shortinfo IMDG, BAM no. 563 (DGG-Info)

BAM name (German)	Maleinsäureanhydrid, geschmolzen
BAM name (English)	Maleic anhydride, molten
BAM name (French)	Anhydride maléique, fondu
Aggregate state (under normal conditions)	solid
BAM no.	563
CAS no.	108-31-6
Detailinfo

German	MALEINSÄUREANHYDRID, GESCHMOLZEN
English	MALEIC ANHYDRIDE, MOLTEN
Detailinfo

Transport status	Carriage permitted in tanks only.
Detailinfo

Labels

Marks

Orange plate for tanks

Limited quantities	No exemption according to the provisions of Chapter 3.4 possible
Excepted quantities	E0, No exemption according to the provisions of Chapter 3.5 possible
Detailinfo

Stowage category	Stowage category A Cargo ships or passenger ships carrying a number of passengers limited to not more than 25 or to 1 passenger per 3 m of overall length, whichever is the greater number -> ON DECK OR UNDER DECK Other passenger ships in which the limiting number of passengers transported is exceeded -> ON DECK OR UNDER DECK
Stowage provisions	none
Segregation groups
Segregation provisions	, , ,
Handling	none
Detailinfo

Transport in packagings is not permitted.

Transport in intermediate bulk containers (IBCs) is not permitted.

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T4 The portable tank instructions T1 to T22 apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. T4 Minimum test pressure (bar): 2,65 Minimum shell thickness (in mm - reference steel) (see 6.7.2.4): see 6.7.2.4.2 Pressure-relief provisions ) (see 6.7.2.8): Normal Bottom opening provisions (see 6.7.2.6): see 6.7.2.6.3 ) When the word "Normal" is indicated, all the requirements of 6.7.2.8 apply except for 6.7.2.8.3.
Special provisions	Special provision TP3 The maximum degree of filling (in %) for solids transported above their melting points and for elevated temperature liquids shall be determined by the following formula in accordance with 4.2.1.9.5.1: Degree of filling = 95 (dr/df) where df = density of the liquid at the mean temperature of the liquid during filling dr = density of the liquid at the maximum mean bulk temperature during transport

Portable tanks (UN tanks)

Tank instruction

Special provisions

Transport in bulk containers (BK containers) is not permitted.

Admissibility	forbidden

Substance information(collapsed)