Shortinfo IMDG, BAM no. 12560 (DGG-Info)

BAM name (German)	1-(Furan-2-yl)ethanon, geschmolzen
BAM name (English)	1-(Furan-2-yl)ethanone, molten
BAM name (French)	1-(Furan-2-yl)éthanone, fondue
Aggregate state (under normal conditions)	solid
BAM no.	12560
CAS no.	1192-62-7
Detailinfo

German	GIFTIGER ORGANISCHER FESTER STOFF, N.A.G., GESCHMOLZEN (1-(Furan-2-yl)ethanon)
English	TOXIC SOLID, ORGANIC, N.O.S., MOLTEN (1-(Furan-2-yl)ethanone)
More transport document names are listed in Detailinfo Detailinfo

Transport status	Carriage permitted in tanks only.
Detailinfo

UN no.	2811
Class
Subsidiary risks
Packing group
Special provisions	Special provision 274 For the purposes of documentation and package marking, the proper shipping name shall be supplemented with the technical name (see 3.1.2.8.1). For UN 3077 and UN 3082 only, the technical name may be a name shown in capital letters in column 2 of the Dangerous Goods List, provided that this name does not include "N.O.S." and that special provision 274 is not assigned. The name which most appropriately describes the substance or mixture shall be used, e.g.: UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PAINT) UN 3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (PERFUMERY PRODUCTS).
Marine pollutant
Environmentally hazardous
EmS	,
Detailinfo

Labels

Marks

Orange plate for tanks

not stated - carriage permitted in tanks only

Stowage category	Stowage category B Cargo ships or passenger ships carrying a number of passengers limited to not more than 25 or to 1 passenger per 3 m of overall length, whichever is the greater number -> ON DECK OR UNDER DECK Other passenger ships in which the limiting number of passengers transported is exceeded -> ON DECK ONLY
Stowage provisions	none
Segregation groups	none
Segregation provisions	none
Handling	none
Detailinfo

Transport in packagings is not permitted.

Transport in intermediate bulk containers (IBCs) is not permitted.

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T7 The portable tank instructions T1 to T22 apply to liquid and solid substances of class 1 and classes 3 to 9. The general provisions of section 4.2.1 and the requirements of section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes or divisions 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the provisions of chapter 6.10 apply to the portable tanks with FRP shells. T7 Minimum test pressure (bar): 4 Minimum shell thickness (in mm - reference steel) (see 6.7.2.4): see 6.7.2.4.2 Pressure-relief provisions ) (see 6.7.2.8): Normal Bottom opening provisions (see 6.7.2.6): see 6.7.2.6.3 ) When the word "Normal" is indicated, all the provisions of 6.7.2.8 apply except for 6.7.2.8.3.
Special provisions	Special provision TP3 The maximum degree of filling (in %) for solids transported above their melting points and for elevated temperature liquids shall be determined by the following formula in accordance with 4.2.1.9.5.1: Degree of filling = 95 (dr/df) where df = density of the liquid at the mean temperature of the liquid during filling dr = density of the liquid at the maximum mean bulk temperature during transport

Portable tanks (UN tanks)

Tank instruction

Special provisions

Transport in bulk containers (BK containers) is not permitted.

Admissibility	forbidden

Substance information(collapsed)