Shortinfo ADR, BAM no. 1092 (DGG-Info)

Drill number
Inherent hazard
Hazard to aircraft
Hazard to occupants
Spill or leak procedure
Firefighting procedure
Additional considerations
Drill letter 1
Drill letter 2

Shortinfo ADR 2025

BAM name (German)	Methylisocyanat, Lösung, entzündbar, Flp. < 23 °C, Sdb. > 35 °C
BAM name (English)	Methyl isocyanate, solution, flammable, fl.p. < 23 °C, b.p. > 35 °C
BAM name (French)	Isocyanate de méthyle, en solution, inflammable, P.I. < 23 °C, P.E. > 35 °C
Aggregate state (under normal conditions)	liquid
BAM no.	1092
CAS no.	(624-83-9)
Detailinfo

German	METHYLISOCYANAT, LÖSUNG
English	METHYL ISOCYANATE SOLUTION
French	ISOCYANATE DE MÉTHYLE EN SOLUTION
Detailinfo

Transport status	allowed
Tunnel restriction code	Tunnel restriction code: C/D Tank carriage: Passage forbidden through tunnels of category C, D and E; Other carriage: Passage forbidden through tunnels of category D and E.
Detailinfo

UN no.	2480
Class
Classification code
Packing group
Special provisions
Detailinfo

Labels

Marks

Orange plate for tanks

Orange plate: Hazard identification number 663, UN number 2480

Hazard identification number	663	highly toxic substance, flammable (flash-point not above 60 °C)
UN number	2480	METHYL ISOCYANATE

Limited quantities	No exemption according to the provisions of Chapter 3.4 possible
Excepted quantities	E0, No exemption according to the provisions of Chapter 3.5 possible
Limited quantity according to 1.1.3.6	20 L
Transport category	1
Detailinfo

Packages	none
Loading, unloading and handling	, Loading, unloading and handling: CV1 (1) The following operations are prohibited: (a) Loading or unloading goods in a public place in a built-up area without special permission from the competent authorities; (b) Loading or unloading goods in a public place elsewhere than in a built-up area without prior notice thereof having been given to the competent authorities, unless these operations are urgently necessary for reasons of safety. (2) If, for any reason, handling operations have to be carried out in a public place, then substances and articles of different kinds shall be separated according to the labels. , Loading, unloading and handling: CV13 If any substances have leaked and been spilled in a vehicle or container, it may not be re-used until after it has been thoroughly cleaned and, if necessary, disinfected or decontaminated. Any other goods and articles carried in the same vehicle or container shall be examined for possible contamination.
Operation	, Operation: S2 Additional requirements concerning the carriage of flammable liquids or gases (1) Portable lighting apparatus The load compartment of closed vehicles carrying liquids having a flash-point of not more than 60 °C or flammable substances or article of Class 2, shall not be entered by persons carrying portable lighting apparatus other than those so designed and constructed that they cannot ignite any flammable vapours or gases which may have penetrated into the interior of the vehicle. (2) Operation of combustion heaters during loading or unloading The operation of combustion heaters of vehicles of type FL (see Part 9) is forbidden during loading and unloading and at loading sites. (3) Precautions against electrostatic charges In the case of vehicles of type FL (see Part 9), a good electrical connection from the vehicle chassis to earth shall be established before tanks are filled or emptied. In addition, the rate of filling shall be limited. , Operation: S9 During the carriage of these substances, stops for service requirements shall as far as possible not be made near inhabited places or frequented places. A longer stop near such places is permissible only with the consent of the competent authorities. Operation: S14 The provisions of Chapter 8.4 concerning the supervision of vehicles shall apply for vehicles carrying any amount of these substances.
Detailinfo

Instructions	P601
Special provisions	none
Mixed packing

Transport in intermediate bulk containers (IBCs) is not permitted.

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T22 The portable tank instructions T1 to T22 apply to liquid and solid substances of Class 1 and Classes 3 to 9. The general provisions of Section 4.2.1 and the requirements of Section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the requirements of Chapter 6.9 apply. T22 Minimum test pressure (bar): 10 Minimum shell thickness (in mm-reference steel for shells made of metallic materials) (see 6.7.2.4): 10 mm Pressure-relief requirements (see 6.7.2.8): See 6.7.2.8.3 Bottom opening requirements (see 6.7.2.6): Not allowed ) ) When "Not allowed" is indicated, bottom openings are not permitted when the substance to be carried is a liquid (see 6.7.2.6.1). When the substance to be carried is a solid at all temperatures encountered under normal conditions of carriage, bottom openings conforming to the requirements of 6.7.2.6.2 are authorized.
Special provisions	Special provision TP2 The degree of filling prescribed in 4.2.1.9.3 shall not be exceeded: Degree of filling = 95 / (1 + alpha x (tr - tf)) where alpha = mean coefficient of cubical expansion of the liquid between tf and tr; tr = maximum mean bulk temperature during carriage [°C]; tf = mean temperature of the liquid during filling [°C].

Portable tanks (UN tanks)

Tank instruction

Special provisions

ADR tanks
Tank code	Tank code L15CH Code L15CH: L = Type of tank: Tank for substances in the liquid state (liquids or solids handed over for carriage in the molten state). ------------------------- 15 = Calculation pressure: Minimum calculation pressure: 15 bar (see 6.8.2.1.14) ------------------------- C = Openings (see 6.8.2.2.2): Tank with top-filling and discharge openings with only cleaning openings below the surface of the liquid. ------------------------- H = Safety valves/devices: Hermetically closed tank (see 1.2.1).
Special provisions	, , , Special provision TE19 Fixed tanks (tank-vehicles), demountable tanks and battery-vehicles: Fittings and accessories mounted in the upper part of the tank shall be either: - inserted in a recessed housing; or - equipped with an internal safety valve; or - shielded by a cap, or by transverse and/or longitudinal members, or by other equally effective devices, so profiled that in the event of overturning the fittings and accessories will not be damaged. Fittings and accessories mounted in the lower part of the tank: Pipe-sockets, lateral shut-off devices, and all discharge devices shall either be recessed by at least 200 mm from the extreme outer edge of the tank or be protected by a rail having a coefficient of inertia of not less than 20 cm³ transversally to the direction of travel; their ground clearance shall be not less than 300 mm with the tank full. Fittings and accessories mounted on the rear face of the tank shall be protected by the bumper prescribed in 9.7.6. Their height above the ground shall be such that they are adequately protected by the bumper. Tank-containers, tank swap bodies and MEGCs: (Reserved)

ADR tanks

Tank code

Special provisions

Vehicle for tank carriage
Tank vehicle	Tank vehicle: FL (a) A vehicle intended for the carriage of liquids having a flash-point of not more than 60°C (with the exception of diesel fuel complying with standard EN 590:2013 + A1:2017, gas oil, and heating oil (light) - UN No. 1202 - with a flash-point as specified in standard EN 590:2013 + A1:2017) in fixed tanks or demountable tanks with a capacity exceeding 1 m³ or in tank-containers or portable tanks with an individual capacity exceeding 3 m³; or (b) A vehicle intended for the carriage of flammable gases in fixed tanks or demountable tanks with a capacity exceeding 1 m³ or in tank-containers, portable tanks or MEGCs with an individual capacity exceeding 3 m³; or, (c) A battery-vehicle with a total capacity exceeding 1 m³ intended for the carriage of flammable gases; or d) A vehicle intended for the carriage of hydrogen peroxide, stabilized or hydrogen peroxide, aqueous solution stabilized with more than 60% hydrogen peroxide (Class 5.1, UN No. 2015) in fixed tanks or demountable tanks with a capacity exceeding 1 m3 or in tank-containers or portable tanks with an individual capacity exceeding 3 m³;

Vehicle for tank carriage

Tank vehicle

Transport in bulk is not permitted.

Transport in bulk containers (BK containers) is not permitted.

Navigation/Einstellungen

Seiten

Verkehrsträger/Vorschrift

Sprache

Shortinfo ADR 2025

Shortinfo ADR 2025

Substance information(collapsed)

Transport document names (collapsed)

Transport exlusions (collapsed)

Classification (collapsed)

Labelling (collapsed)

Limited and excepted quantities (collapsed)

Special provisions for carriage (collapsed)

Containments (collapsed)

Pack­ag­ings (collapsed)

In­ter­me­dia­te bulk con­tai­ners (IBC) (collapsed)

Large pack­ag­ings (collapsed)

Tanks (collapsed)

Bulk (collapsed)

Bulk con­tai­ners (collapsed)