Shortinfo ADR, BAM no. 563 (DGG-Info)

BAM name (German)	Maleinsäureanhydrid, geschmolzen
BAM name (English)	Maleic anhydride, molten
BAM name (French)	Anhydride maléique, fondu
Aggregate state (under normal conditions)	solid
BAM no.	563
CAS no.	108-31-6
Detailinfo

German	MALEINSÄUREANHYDRID, GESCHMOLZEN
English	MALEIC ANHYDRIDE, MOLTEN
French	ANHYDRIDE MALÉIQUE FONDU
Detailinfo

Transport status	Carriage permitted in tanks only.
Tunnel restriction code
Detailinfo

Labels

Marks

Orange plate for tanks

Hazard identification number	80	corrosive or slightly corrosive substance
UN number	2215	MALEIC ANHYDRIDE, MOLTEN

Limited quantities	No exemption according to the provisions of Chapter 3.4 possible
Excepted quantities	E0, No exemption according to the provisions of Chapter 3.5 possible
Limited quantity according to 1.1.3.6
Transport category
Detailinfo

Packages	not stated - carriage permitted in tanks only
Loading, unloading and handling	none
Operation	none
Detailinfo

Transport in packagings is not permitted.

Transport in intermediate bulk containers (IBCs) is not permitted.

Transport in large packagings is not permitted.

Portable tanks (UN tanks)
Tank instruction	Tank instruction T4 The portable tank instructions T1 to T22 apply to liquid and solid substances of Class 1 and Classes 3 to 9. The general provisions of Section 4.2.1 and the requirements of Section 6.7.2 shall be met. The instructions for portable tanks with FRP shells apply to substances of classes 1, 3, 5.1, 6.1, 6.2, 8 and 9. Additionally, the requirements of Chapter 6.9 apply. T4 Minimum test pressure (bar): 2.65 Minimum shell thickness (in mm-reference steel for shells made of metallic materials) (see 6.7.2.4): See 6.7.2.4.2 Pressure-relief requirements (see 6.7.2.8): Normal ) Bottom opening requirements (see 6.7.2.6): See 6.7.2.6.3 ) When the word "Normal" is indicated, all the requirements of 6.7.2.8 apply except for 6.7.2.8.3.
Special provisions	Special provision TP3 The maximum degree of filling (in %) for solids carried above their melting point and for elevated temperature liquids shall be determined in accordance with 4.2.1.9.5. Degree of filling = 95 x ( dr / df ) where dr = density of the liquid during carriage; df = density of the liquid during filling [°C].

Portable tanks (UN tanks)

Tank instruction

Special provisions

ADR tanks
Tank code	Tank code L4BN Code L4BN: L = Type of tank: Tank for substances in the liquid state (liquids or solids handed over for carriage in the molten state). ------------------------- 4 = Calculation pressure: Minimum calculation pressure: 4 bar (see 6.8.2.1.14) ------------------------- B = Openings (see 6.8.2.2.2): Tank with bottom-filling or bottom-discharge openings with 3 closures. ------------------------- N = Safety valves/devices: Tank without a breather device according to 6.8.2.2.6 and not hermetically closed.
Special provisions	none

ADR tanks

Tank code

Special provisions

none

Vehicle for tank carriage
Tank vehicle	Tank vehicle: AT (a) A vehicle, other than EX/III or FL vehicle or than a MEMU, intended for the carriage of dangerous goods in fixed tanks or demountable tanks with a capacity exceeding 1 m³ or in tank-containers, portable tanks or MEGCs with an individual capacity exceeding 3 m³; or (b) A battery-vehicle with a total capacity exceeding 1 m³ other than a FL vehicle.

Transport in bulk is not permitted.

Transport in bulk containers (BK containers) is not permitted.

Substance information(collapsed)